Knowledgebase: Print/Scan/Copy
Printer Maintenance - Cleaning
Posted by - NA - on 09 February 2010 03:13 PM

Printer Maintenance - Cleaning

*Make sure what kind of printer it is and model number that printer is*

 

Step one:  Turn off Printer and Unplug from Outlet.

Step Two:  Open Printer from the top, on the front of the printer

Step Three: Take out toner

Step Four: Wipe off excess dust and ink (if ink and/or dust is dried up, use acetone and wipe off)

Step Five:  Check the surface area of the top roller for grooves needed for traction

  • If ridges are not apparent, use acetone

Step Six: Remove papertray and repeat step five on remaining rollers.

Step Seven: If everything is fine and functional, put everything back into the appropriate place and turn printer back on.  

 


 

(16 vote(s))
Helpful
Not helpful

Comments (0)